TOHATSU TLDI MD 115A SERIES, Руководство по обслуживанию

Страница: 69 / 353

3-22
Inspections and Adjustments
TLDI 115A 2007
4. Fill with gear oil (from oil tube or pump) through lower plug
hole
1
until gear oil starts to leak from upper oil plug hole
a
without air bubble.
2) Replacement of Gear Oil
1. Tilt outboard motor a little as shown.
2. Place drain oil pan below oil plug
1
, remove lower oil plug
1
and then upper oil plug
2
to drain oil.
5. Attach new gasket
3
and upper oil plug
2
, and then new
gasket
3
and lower oil plug
1
quickly.
Gear Oil:
Hypoid Gear Oil
API:GL-5 SAE:#90
Gear Oil Quantity:
900 cm 3 (30.4 fl.oz)
OIL
2
1
a
2
1
2
1
3
a
3
3. Check gear oil for presence of metal particles, change of
color (abnormal if clouded), and viscosity. Check lower
unit internal components if necessary.
Remove lower oil plug first when draining.
Use lower plug hole when filling with gear oil.
Upper hole cannot be used because doing so
will not allow air to escape from gear case.
When fully filled with oil, attach upper oil plug
first.
3 Gasket
Do not reuse.
MD115A̲ch03̲E̲2校̲070606.qxd 07.6.6 5:41 PM ページ 22