TOHATSU TLDI MD 115A SERIES, Руководство по обслуживанию

Страница: 262 / 353

Cowl, Bracket and PTT
7-36 TLDI 115A 2007
21) Disassembling Bracket Unit and
Assembling the Parts
1. Remove manual valve
1
.
2. Attach a new O ring to down relief valve.
1
5
4
3. Attach filter
2
to down relief valve
3
, and put the filter
assembly in the gear pump.
4. Attach new O ring
4
to manual valve.
5. Install manual valve to gear pump and secure it with "C"
ring
5
.
3
2
Manual Valve :
3 N · m (2.2 lb · ft) [0.3 kgf · m]
22) Disassembly of Tilt Cylinder and Trim
Cylinder, and Assembly of the Parts
1. Loosen and remove tilt cylinder rod guide
3
by using trim
rod guide wrench
1
and remove tilt piston ass'y.
1
3
CAUTION
When removing tilt cylinder rod guide, fully
extend trim rods and tilt arm.
2. Drain PTT fluid.
3. Loosen and remove trim cylinder rod guide
4
by using
trim rod guide wrench
2
and remove trim piston ass'y.
4. Drain PTT fluid.
5. Install piston ass'y and temporary tighten trim cylinder rod
guide.
2
4
Trim Rod Guide Wrench
1
:
P/N. 3C8-72791
Trim Rod Guide Wrench
2
:
P/N. 3B7-72792
MD115A̲ch07̲E̲2校̲070604.qxd 07.6.7 11:09 AM ページ 36