![TOHATSU TLDI MD 115A SERIES Скачать руководство пользователя страница 331](http://html1.mh-extra.com/html/tohatsu/tldi-md-115a-series/tldi-md-115a-series_service-manual_1124699331.webp)
10-6
Rigging
r/min
TLDI 115A 2007
3.
Install outboard motor(s).
4.
Secure the outboard motor by using fasteners contained in
the package of the product.
1
: 12.7mm (1/2in.) Bolts (4 pcs.)
2
: Flat Washers (4 pcs.)
3
: Lock Nuts (4 pcs.)
4
: Flat Washers (4 pcs.)
4
: Marine Sealant : Apply to the bolts' surface excluding
their threaded area.
1
3
4
2
5
3. Fuel System
It is recommended to install additional large sized fuel/water separator on the boat to effectively remove water and foreign
substances contained in the fuel. At the same time however, note that the fuel filter added to the fuel system may prevent
smooth flow of fuel, possibly causing the engine to stall at low speeds, or fuel to be lean at higher engine speed resulting in
giving damage to the engine. Use of valve fitting can also cause similar troubles.
WARNING
To prevent damaging to the engine, use the
following steps to prime the electric oil
pump, pressure-feed the oil, and air-purge
the oil in the order described below before
s t a r t i n g t h e e n g i n e i n i t i a l l y a f t e r t h e
installation of the outboard motor.
1) Fuel
Avoid the use of old gasoline or gasoline containing impurities such as sand or mud in any occasion such as break-in
operation of the engine and even after the break-in.
2) Oil
Use Genium MD Oil. (Oil for two stroke direct injection engine recommended by the outboard manufacture)
WARNING
Do not use gasoline pre-mixed with engine
oil for this engine.
Use of low quality engine oil can cause serious
damage to the engine.
3) Electric Fuel Pump
Electric fuel pump pressure, if used in conjunction with engine mechanical fuel pump, must be limited to no more than 0.03
MPa (4 psi) [0.3kg/cm
2
].
4) Installation of Fuel Filter
<Portable Fuel Tank>
Fix the tank on the proper location of the boat taking into consideration the engine
'
s fuel hose length.
<Stationary Fuel Tank>
Install the tank in accordance with regulations relevant to grounding, anti-siphoning protection, ventilation and other matters.
MD115A̲ch10̲E̲2校̲070605.qxd 07.6.6 7:03 PM ページ 6
Содержание TLDI MD 115A SERIES
