TOHATSU TLDI MD 115A SERIES, Руководство по обслуживанию

Страница: 112 / 353

4
4-39 TLDI 115A 2007
5) Disassembly of Compressor Housing
1. Remove oil seal
1
and bearing
2
.
1
2
2
CAUTION
Do not reuse removed bearing.
6) Inspection of Reed Valve
1. Check if reed valve is bent, damaged or worn.
Replace reed valve ass'y if the reed valve gap is over the
specified limit.
a
a
Heat compressor housing to 60 to 70 degrees
Centigrade (140 to 158 degrees Fahrenheit) by
using hot water before removing bearing
2
.
Heating of compressor housing can also be
made by using a heat gun or heat lamp.
7) Inspection of Cylinder and Piston
1. Clean compressor cylinder, compressor head and
compressor housing, check the parts for cracks damages.
Replace if necessary.
2. Check cylinder wall for wear or scuffing.
Replace if necessary.
3. Clean piston and check for crack and damages.
Replace if necessary.
4. Check that connecting rod small end moves smoothly.
Replace if necessary.
Gap of Reed Valve at the Tip
a
:
0.2 mm (0.008 in)or less
1 2
Do not reuse
MD115A̲ch04̲E̲2校̲070605.qxd 07.6.6 5:42 PM ページ 39