Settings
46
6.2.3 Setting parking mode
You can set the operating mode of the product while the vehicle is parked. Follow the instructions to set
parking mode.
To use parking mode, you must install the continuous power cable. If continuous power is not supplied to
the product, the product will stop recording when the vehicle engine is turned off.
For more information about parking mode, refer to "3.6 Using parking mode"
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Record settings
and then tap the
Setting button next to
Parking Mode
.
2
Select
Motion detection
,
Time Lapse
, or
OFF
, and then tap
Apply
.
3
Tap
OK
on the confirmation screen. The new setting is applied to the system as soon as a change is
made.
6.2.4 Setting the parking impact sensitivity
You can set the detection sensitivity for recording when impact is detected while parking. Refer to the
following instructions to set the parking impact sensitivity.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Record settings
and then tap the
Setting button next to
Parking sensitivity
.
2
Switch the button to
Lower
,
Low
,
Mid
,
High
, or
Higher
. The new setting is applied to the system as
soon as a change is made.
6.2.5 Setting the motion detection sensitivity (for the Motion detection feature)
The Motion detection feature records a video when a moving object is detected near your vehicle. Refer to
the following instructions to set the motion detection sensitivity.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Record settings
and then tap the
Setting button next to
Motion Sensitivity
.
2
Switch the button to
Low
,
Mid
,
High
, or
OFF
. The new setting is applied to the system as soon as a
change is made.
