Installing the product
15
7
Connect the continuous power cable to the
product’s DC-IN power connector and start the
engine to make sure the product operates normally.
After the product is powered on, the Status LED
and the voice guide are turned on and the
Caution
screen will appear on the display for 5 seconds.
8
When the
Caution
screen is closed, check the camera angle through the LCD display.
9
1/8 1/4
Adjust the camera angle to let the hood of the
vehicle cover 1/8 – 1/4 of the screen, as shown in
the image to the left.
10
Tighten the screw of the fixing bracket firmly by
using a flat-head screwdriver or a coin.
