Using Advanced Driver Assistance Systems (ADAS)
42
To deactivate the FVSA, tap the Home button ( ) on the Live view screen
>
Settings
>
Road safety settings
,
and then tap the button next to
FVDW (Front Vehicle Departure Warning)
to switch the setting to
OFF
.
5.6 The blind spot detector (BSD)
When you turn on the turn signals to change lanes, the BSD
will detect vehicles in the blind spot. If a vehicle is detected,
the buzzer will sound and the warning will be displayed on the
screen.
To activate the BSD, you must install the BSD sensor behind the
rear bumper of your vehicle.
There is a vehicle in the left-side blind spot.
There is a vehicle in the right-side blind spot.
The BSD warning (left)
The BSD warning (right)
For your safety, the BSD warning will be displayed
on the LCD even when the LCD is turned off.
To deactivate the BSD, tap the Home button ( ) on the Live view screen
>
Settings
>
Road safety settings
,
and then tap the Setting button next to
Blind spot information
to switch the setting to
OFF
.
•
To activate the BSD, you must install the BSD sensor behind the rear bumper of your vehicle and the T/S
cable. For more information about the BSD sensor (optional), refer to its User Manual.
•
The left and right sides of the rear view image will be reversed when the BSD is activated.
