ThermoFisher Scientific Vanquish VH-D10, Руководство по эксплуатации

Страница: 85 / 196

6 • Operation
Vanquish Diode Array Detectors (VH-D10) Operating Manual Page 85
MUTE ALARM
If beeping alerts you that the detector firmware detected a problem, for
example leakage, beeping continues until you turn off the beep. Pressing
this button turns off the beep for the current alarm. As a standard,
beeping starts again after 10 minutes if the problem is still present or if
the firmware detected another problem.
UV
The UV button allows you to turn the UV lamp on and off directly from
the detector. To turn on the UV lamp, press the UV button.
The LED next to the button indicates the lamp status:
LED Description
Off (dark) The UV lamp is turned off.
Green, flashing The UV lamp ignites.
Green The UV lamp is turned on.
When the detector is connected in the Chromeleon software
The button functionality is as follows when the detector is connected in
the Chromeleon software:
• No injection (sample) or sequence or baseline monitoring is running:
All functions are available from the keypad.
•
An injection (sample) or sequence or baseline monitoring is running:
The
Mute Alarm function remains available from the keypad,
allowing you to turn off the beep for the current alarm.