ThermoFisher Scientific Vanquish VH-D10, Руководство по эксплуатации

Страница: 55 / 196

5 • Installation
Vanquish Diode Array Detectors (VH-D10) Operating Manual Page 55
No. Description
6 USB hub ("A" type connector)
Allows connection to other modules in the Vanquish system
7 USB (Universal Serial Bus) port ("B" type connector)
Allows connection to other modules in the Vanquish system or the computer
on which the data management system is installed, such as the Chromeleon
software
TIP Thermo Fisher Scientific recommends using the USB ports only as
described above. If the USB ports are used for any other purpose,
Thermo Fisher Scientific cannot ensure proper functionality.
Connecting the Detector
NOTICE
• Never use defective communication cables. If you suspect that a
cable is defective, replace the cable.
•
To ensure trouble-free operation, use only the cables provided by
Thermo Fisher Scientific for connecting the detector.
1. Place the detector in the system as required by the system
configuration. For details, refer to the
Vanquish System Operating
Manual
.
2. Connect the required interface cables to the detector.
For information about how to connect the detector to other
modules in the Vanquish system or to the chromatography data
system computer, refer to the
Vanquish System Operating Manual
.
3. Verify that the power switch on the detector is set to OFF.