ThermoFisher Scientific QuantStudio 6 Pro, Руководство пользователя

Страница: 131 / 216

Connect to the SAE server
• Install the SAE Administrator Console and the SAE server on a computer with a
static IP address.
• Before you connect, close all plate files and data files.
Note: Connect the software and any instruments to the same SAE server to ensure
that audit records are maintained across system components.
1.
In the menu bar, click System
4
SAE Connection Settings .
2.
Enter the IP address and port number of the SAE server.
3.
( Optional ) Click Test Connection to confirm that the connection information is
correct.
4.
Click Save .
Enable SAE functions in QuantStudio ™ Design and Analysis Software v2
This procedure requires an SAE administrator account.
Before you enable SAE functions in the QuantStudio
™
Design and Analysis Software
v2, you must complete the following tasks:
• Connect to the SAE server (see “Connect to the SAE server” on page 131).
• Close all plate files and data files.
1.
In the QuantStudio
™
Design and Analysis Software v2, select
System
4
Enable Security .
2.
Enter your SAE administrator account username and password, then click
Sign In .
The SAE administrator account is automatically signed into the software after SAE is
enabled. The SAE username is displayed in the upper-right corner of the software
menu bar.
Chapter 9
Use the instrument with the Security, Auditing, and E
‑
signature (SAE) v2.0 module
Enable SAE functions
9
QuantStudio ™ 6 Pro and 7 Pro Real-Time PCR Systems User Guide
131