ThermoFisher Scientific QuantStudio 6 Pro, Руководство пользователя

Страница: 117 / 216

Manage individual instrument profiles
Create an administrator instrument profile during initial start-up
The first instrument profile that is created during installation is assigned the role of an
instrument administrator. Administrators can grant administrative privileges to other
users (see “Enable or disable administrator privileges” on page 120).
Note: An instrument administrator is separate from a Connect administrator (see
“Recommended order to set up profiles” on page 108).
1.
Tap Name , enter a user name, then tap Done .
2.
Tap PIN , enter a four-digit numerical PIN, then tap Enter .
Note: Tap the PIN checkbox to switch the PIN display on or off.
3.
Tap Confirm PIN , then enter the four-digit numerical PIN again.
4.
Tap Create Profile .
Set up facial authentication at the initial creation of an instrument profile
When a profile is set up for facial authentication, the photographs should reflect how
the user appears in the lab. For example, safety glasses should be worn to set up
facial authentication if safety glasses will be worn when signing in.
1.
On the Instrument Profile page, tap Set up now .
2.
Prepare for the photographs, then tap Next .
3.
Center your face within the green frame, then tap Start .
Note:
You must position yourself close enough to the instrument so that the
green frame shows only your face without any of the surrounding background.
This position is closer to the instrument than when you sign in with facial
authentication.
The instrument will take three separate photos after you tap
Capture . The
instrument will display a countdown before each individual photo is taken.
4.
Tap one of the following options.
• Done
•
Re-take
5.
Tap Done after Your instrument profile has been created is displayed.
Chapter 8
Manage profiles
Manage individual instrument profiles
8
QuantStudio ™ 6 Pro and 7 Pro Real-Time PCR Systems User Guide
117