Thermo Orion Star, Руководство пользователя

Страница: 30 / 111

Thermo Electron Corporation V-12 Orion Star Series Meter
Menu Setup
Setting Calibration
The indicates calibration mode or calibration setup .
Before beginning a calibration, prepare the electrode or probe according to the
instructions received with the electrode . The calibration standards or buffers or
calibration sleeve should also be prepared prior to the calibration . After preparing
the electrode or probe per manufacturer’s instructions, connect the electrode or
probe to the meter . Basic information on proper calibration for each measurement
technique is found in the appropriate section of this manual .
General Navigation for Selecting Calibration
1 . In measurement mode press until the arrow icon on the left of the screen is
pointed toward the measurement mode to the calibrated:
pH, ORP, ISE • Conductivity • DO
2 . Press / until the appropriate icon is lit for the measurement mode to
be calibrated .
A
– pH/ORP/ISE
pH icon – pH Calibration
RelmV icon – ORP Calibration
ISE icon or no icon – ISE Calibration
B
– Conductivity Calibration
mS/cm, μS/cm, mg/L, ppt icon and MΩ-cm
C
– DO Calibration
%Sat or mg/L icon
No icon – Barometer Calibration
3 . Then press to begin the selected calibration .