Thermo Orion Star, Руководство пользователя

Страница: 24 / 111

Thermo Electron Corporation V-6 Orion Star Series Meter
Menu Setup
Continuous, Timed, or AUTO-READ
™
Measurement Selection
The following table describes in greater detail the abbreviations shown on the
display screen .
Description Display Range of Values Default
Value
Method
Specific
Continuous, Timed,
or Auto-Read
Measurement Selection rEAd
tyPE
COnt
Cont, AUtO, timE
Timed, Continuous, or
Auto-Read; Auto Prints
and Datalogs in AUTO &
Timed Modes
Auto Yes
Timed Reading Setting rEAd
tImE
00:00 00:05 - 99:61
Timed Readings in Minutes
& Seconds
01:00
Yes
To change settings, simply use and / to move between options .
Pressing will confirm the change of a value and end the flashing display .
Orion Star Series meters allow you to select your preferred timing for measurement
intervals .
• In continuous mode the instrument is constantly making
measurements and updating the screen . To Print & Log the
measurement in this mode press
.
• In timed mode the instrument is constantly making
measurements, updating the display, and will automatically
log and print data at a pre-selected time interval .
• In the setup menu enter the minutes & seconds
between timed readings by pressing / to
change the value of the flashing digit . Press to
change the digit to be scrolled .
• The minimum time interval is 5 seconds . Acceptable
time ranges are:
–