Thermo Scientific Vanquish VF-D20, Руководство по эксплуатации, Страница: 145 / 182

7 • Maintenance and Service
Vanquish Charged Aerosol Detectors Operating Manual Page 145
7.13 Slide-In Module
CAUTION—Damaged Gas Tubes and Compressed Gas
Trying to remove the slide-in module with the gas tubes being connected
to the detector can damage the gas tubes and the connectors on the
detector. Using damaged gas tubes with compressed air can pose health
and safety risks. Disconnect the gas tubes always before you remove the
slide-in module from the enclosure.
CAUTION—Heavy Load, Bulky Device
The detector is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the detector, observe the
following guidelines:
• Physical handling of the detector, including lifting or moving,
requires a team effort of two persons.
•
A team effort is in particular required when lifting the detector into
the system stack or when removing it.
7.13.1 Removing the Slide-In Module
Tools required
Screwdriver, Torx T20
Preparations
Prepare the detector for transport. See the Transporting or Shipping the
Detector section
in this operating manual.