Thermo Scientific Vanquish VF-D20, Руководство по эксплуатации, Страница: 142 / 182

7 • Maintenance and Service
Page 142 Vanquish Charged Aerosol Detectors Operating Manual
7.12 Transporting or Shipping the Detector
If you want to transport the detector to a new location or if you need to
ship the detector, first prepare the detector for transport and then move
or ship the detector as required. Follow the instructions in this section.
Observe the following safety guidelines:
CAUTION—Heavy Load, Bulky Device
The detector is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the detector, observe the
following guidelines:
• Physical handling of the detector, including lifting or moving,
requires a team effort of two persons.
•
A team effort is in particular required when lifting the detector into
the system stack or when removing it.
•
Use the carrying handles that were shipped with the detector to
move or transport the detector. Never move or lift the detector by
the front doors. This will damage the doors or the detector.
Preparing the Detector for Transport
To prepare the detector for transport, follow these steps:
1. Perform a long-term shut down of the detector. See section 6.8.2
Long-Term Shutdown, page 112 .
2. Turn off the detector with its main power switch and disconnect the
power cord.
3. Remove all cables and flow connections to other devices.
4. Disconnect the gas inlet and exhaust tubes from the detector. See
section 7.5, page 125 .
5. Disconnect the waste line from the detector. See section 7.6,
page 127 .
6. Remove the nebulizer. See section 7.7, page 128 .