Thermo Scientific Vanquish VF-D20, Руководство по эксплуатации, Страница: 102 / 182

6 • Operation
Page 102 Vanquish Charged Aerosol Detectors Operating Manual
Parameters Description
Evaporator temperature
control Temperature control for the evaporation tube is enabled
as a standard when the detector is shipped.
Evaporator
temperature nominal
Specifies the setpoint for the evaporation temperature.
As a standard, the
Evaporator Temperature Nominal is set
to 35 °C.
For further information, see
section 6.7.5 Evaporation
Temperature, page 107 .
Evaporator
temperature
Displays the actual temperature of the evaporation tube.
The actual temperature depends on several factors,
including mobile phase composition and temperature,
pump flow rate, gas temperature, and ambient
temperature.
As a standard, the temperature unit is
°C
.
Power function Sets by what factor a linearization is applied to the data
output. As a standard, the
Power Function is set to 1.00 .
For further information, see section 6.7.7 Power Function
Value, page 109 .
Leak detection Leak detection is enabled as a standard when the detector
is shipped (
Leak Sensor Mode = Enabled ). This is the
preferred setting.