Thermo Scientific Surveyor RI Plus, Руководство по оборудованию

Страница: 16 / 58

1
Introduction
Status LEDs
4 Surveyor RI Plus Detector Hardware Manual Thermo Scientific
Status LEDs
Four status LEDS—labeled POWER, COMM, RUN, and TEMP—are located on the right
door of the detector. See
Figure 3 . Table 2 lists the states of the LEDs.
Figure 3. Status LEDs
11 CHASSIS GND Ground terminal
12 NC
13 INTE Integrator out
14 INTEGRATOR - Integrator out
15 CHASSIS GND
16 NC
Table 1. Terminals on the back panel of the RI detector (Sheet 2 of 2)
Terminal No. Label Description
Table 2. States of the status LEDs
LED Status Meaning
Power Green The detector is on and receiving power
Comm Amber There is no communication with the data system.
Green Communication to the data system is established.
Run Amber The detector is not ready to start a run.
Flashing amber An error occurred during the run.
Green The detector is ready to initiate a run.
Flashing green A run is in progress and the detector is sending data to
the data system computer.
Temp Amber The temperature of the detector is not equilibrated.
Green The detector has reached a stable.
Power Comm Run Temp