Thermo Scientific SOLA II, Руководство пользователя

Страница: 130 / 205

Watlow EZ-ZONE® PM6 Series
Software Configuration
A-16 SOLA II User Guide Thermo Fisher Scientific
Parameter Description
Closed-Loop Set Point The set point currently in effect (°C).
Process Value Active The current filtered process value using the control input (°C).
Table A–26. Oven settings: Operations Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Control Mode Auto The loop will use automatic
control.
Autotune Set Point 90% The percentage of the current set
point that will be used by
autotune.
Autotune No
Closed-Loop Set Point 190.0°C The set point the controller will
automatically control to.
Idle Set Point 25.0°C The closed loop set point that can
be triggered by an event state.
Heat Proportional Band 14.0°C The PID proportional band for the
heat outputs.
Heat Hysteresis 2.0°C The process value needs to be
this far into the “on” region before
the output turns on.
Cool Proportional Band 14.0°C The PID proportional band for the
cool outputs.
Cool Hysteresis 2.0°C The process value needs to be
this far into the “on” region before
the output turns on.
Time Integral 180 The PID integral (seconds).
Time Derivative 0 The PID derivative (seconds).
Dead Band 0.0°C The offset to the proportional
band.
Open Loop Set Point 0.0% The fixed level of output power
when in manual (open loop)
mode.
Table A–27. Oven settings: Operations Page > Alarm 1