Thermo Scientific SOLA II, Руководство пользователя

Страница: 115 / 205

Thermo Fisher Scientific SOLA II User Guide A-1
Appendix A
Watlow EZ-ZONE
®
PM6 Series
The Watlow EZ-ZONE
®
PM6 series controller is used to control the
temperatures of the pyrolyzer furnace and the analyzer oven. The controller
provides a signal output if the zone temperature is outside a specified range.
This appendix provides basic operating instructions and default configuration
settings. For complete operating information and troubleshooting, refer to the
EZ-ZONE PM PID Controller user’s manual.
The EZ-ZONE PM6 is wired at the factory according to your application. No
other hardware settings are required.
The display and keys on the EZ-ZONE PM6 are shown below and described in
the table that follows.
Figure A–1. EZ-ZONE PM6 series controller
Controller
Description
Hardware Setup
Display & Keys