Thermo Scientific SOLA II, Руководство пользователя

Страница: 122 / 205

Watlow EZ-ZONE® PM6 Series
Software Configuration
A-8 SOLA II User Guide Thermo Fisher Scientific
Table A–10. Pyrolyzer settings: Operations Page > Monitor 1
Parameter Description
Display Software
Control Mode Active
The control mode currently in effect. Possible displays listed below.
Off
Auto
Manual
Heat Power The current heat output level (%).
Cool Power The current cool output level (%).
Closed-Loop Set Point The set point currently in effect (°C).
Process Value Active The current filtered process value using the control input (°C).
Table A–11. Pyrolyzer settings: Operations Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Control Mode Auto The loop will use automatic
control.
Autotune Set Point 90% The percentage of the current set
point that will be used by
autotune.
Autotune No
Closed-Loop Set Point 1100°C The set point the controller will
automatically control to.
Idle Set Point 24°C The closed loop set point that can
be triggered by an event state.
Heat Proportional Band 14°C The PID proportional band for the
heat outputs.
Heat Hysteresis 2°C The process value needs to be
this far into the “on” region before
the output turns on.
Cool Proportional Band 14°C The PID proportional band for the
cool outputs.
Cool Hysteresis 2°C The process value needs to be
this far into the “on” region before
the output turns on.