Thermo Scientific SOLA II, Руководство пользователя

Страница: 105 / 205

Maintenance & Troubleshooting
Replacing the Pyrolyzer Heater
Thermo Fisher Scientific SOLA II User Guide 10-11
Figure 10–12. Heater wires inserted into terminal block
18. Inspect the O-ring around the open end of the pyrolyzer housing. If
necessary, replace it and apply a lubricant compound, such as Dow
Corning® 111, around it (Figure 10-13).
Figure 10–13. Pyrolyzer housing O-ring
19. Gently slide the lid into the housing.
Note
The pyrolyzer tube, insulation, and Kaowool insulation should still be
attached to the lid. Slide the lid back in carefully to avoid damaging the
pyrolyzer tube.
σ
20. Use the six screws and washers removed earlier to secure the lid to the
housing.
21. With an air gun placed at the end of one fitting, blow out any dust or
debris that may have dropped inside the pyrolyzer quartz or glass tube
(Figure 10-13).