Using the WinPDM Software
Starting a Programmed Sample Run
Thermo Fisher Scientific
PDM3700 Instruction Manual
3-7
display. Refer to Configuring a Program Shift later in this chapter for
more information on correcting programming errors.
Figure 3–6.
Programmed
You can now exit from the WinPDM software application and disconnect
the PDM3700 unit from its charger. If you leave the PDM3700 connected
to the charger, the PDM - COM1 screen will display the “Start Time”
(date and time) on the screen (
Figure 3–7
) until 35 minutes before the start
date/time. At the 35-minutes mark, the PDM - COM1 screen will display
a “Warming” message on the screen for 35-minutes. After the warming
period ends, the PDM3700 unit will begin its sample run and the PDM -
COM1 screen will display a “Running” message on the screen (
Figure 3–
8
).
