Basic Operation
Sample Run Screens
Thermo Fisher Scientific
PDM3700 Instruction Manual
2-21
The PDM3700 displays several screens during a sample run. Information
includes cumulative exposure and other data, as well as whether the
instrument is operating properly (refer to the “System Status” section later
in this chapter for more information on status.
The Warming screen (
Figure 2–32
) displays a countdown of the unit’s
warm-up time duration before the unit starts a sample run.
Figure 2–32.
Warming screen
The Warming screen contains the following information:
●
Wearer ID 477
. This field contains an 8-digit user-identification
number. You can set this value using the WinPDM software
application (Chapter 4).
●
Warming: 28:07
. This field contains the time countdown
(minutes:seconds) of the PDM3700 unit’s warm-up time duration
before the unit starts a first primary sample run. At the end of the
warm-up time, the PDM3700 will automatically begin running a first
primary sample run and display the First Sample - Screen #1.
First Sample - Screen #1 (
Figure 2–33
) displays the mass concentration and
cumulative exposure for the first primary sample run (“Sample 1”) during
the sample run. This screen will display automatically when the warm-up
time duration for the first primary sample has completed.
Figure 2–33.
First Sample - Screen #1
This screen also displays the total mass concentration, and total cumulative
exposure values at the end of the first primary sample run (“Sample 1”).
The First Sample - Screen #1 contains the following information:
Sample Run
Screens
Warming Screen
First Sample -
Screen #1
