Using the WinPDM Software
Installing WinPDM
3-2
PDM3700 Instruction Manual
Thermo Fisher Scientific
the MSHA requirements. Always verify that the latest approved version of
WinPDM is being used.
▲
1.
Exit all Windows programs currently running on your PC.
2.
Place the PDM3700 software CD-ROM in the CD-ROM drive.
3.
Open the “Software” folder on the PDM3700 software CD-ROM,
then open the “WinPDM Setup.exe” file located in the Software folder.
4.
The InstallShield Wizard screen (
Figure 3–1
) will post several
temporary installation messages while WinPDM prepares the
installation program. Then the WinPDM - InstallShield Wizard screen
with a “Welcome” message will display. Select the “Next>“ button.
Figure 3–1.
InstallShield Wizard screen with Welcome message
5.
The InstallShield Wizard screen with a “License Agreement” message
will display. Accept the terms of the license agreement then select the
“Next>“ button
6.
The InstallShield Wizard screen with a “Customer Information”
message will display. Enter the appropriate information into the white
boxes, and then select the “Next>“ button.
7.
The InstallShield Wizard screen with a “Destination Folder” message
will display. Select the “Next>“ button.
8.
The InstallShield Wizard screen with a “Ready to Install the Program”
message will display. Select the “Install” button.
To install WinPDM onto a PC:
