Basic Operation
PDM Display
2-12
PDM3700 Instruction Manual
Thermo Fisher Scientific
When not running a sample, the PDM3700 will automatically turn off its
LED display after 30 seconds of inactivity (power-save function).
However, during the warm-up time and sampling cycle, the PDM3700
will continue to activate its LED display until the sample run ends. At the
end of the sample run, after 30 seconds of inactivity, the PDM3700 will
then automatically turn off its LED display. If the PDM3700 is connected
to the WinPDM software, the PDM3700 display will stay on continuously.
The display on the top panel (
Figure 2–19
) of the PDM3700 allows for
easy navigation through the instrument’s firmware screens by pressing the
“A” or “WAKE UP” button and the “B” or “SCROLL” button.
Figure 2–
20
provides a hierarchy of all the firmware screens that can be accessed by
pressing the “A” and “B” buttons when the unit has been set up to run a
manual sample run.
Figure 2–19.
PDM3700 display
PDM Display
