manualshive.com logo in svg

Thermo Scientific PDM3700, Руководство пользователя

Поделиться
Скачать
Thermo Scientific PDM3700 Скачать руководство пользователя страница 6

Safety 

Safety and Equipment Damage Alerts 

ii

     PDM3700 Instruction Manual 

Thermo Fisher Scientific 

Safety 

Repair of instrumentation manufactured by Thermo Fisher Scientific 
should only be attempted by properly trained service personnel, and should 
only be conducted in accordance with system documentation. Do not 
tamper with this hardware. High voltages may be present in all instrument 
enclosures. Use established safety precautions when working with this 
instrument. 

There are several safety hazards that the general operator and service 
technician must be aware of when operating and servicing the PDM3700. 
The hazards include: burn hazards, moving parts and pinch hazards, and 
voltage hazards. 

The seller cannot foresee all possible modes of operation in which the user 
may attempt to utilize this instrumentation. The user assumes all liability 
associated with the use of this instrumentation. The seller further disclaims 
any responsibility for consequential damages. Use of this product in any 
manner not intended by the manufacturer will void the safety protection 
provided by the equipment, and may damage the equipment and subject 
the user to injury. 

 

WARNING  

The battery pack (PN: 56-010897-2300) is designed with 

specific individual battery cells. These battery cells are not user replaceable. 
The battery packs may be replaced only by MSHA certified individuals 
pursuant to 30 CFR Parts 70, 71 & 90. All charging of these battery packs 
shall take place while installed in the PDM3700 and in fresh air in Battery 
Charging stations as defined in 30 CFR 75.340 or fresh air above ground. 

▲

 

 

WARNING  

Only MSHA certified individuals may perform maintenance, 

calibration and sampling pursuant to 30 CFR Parts 70, 71 & 90. This 
includes changing the battery packs, sample pump, cleaning the sample 
inlet, and other maintenance items as described in the operator’s manual. 

▲

 

 

 

 

Содержание PDM3700













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды