Thermo King Ce-Series, Руководство оператора

Страница: 5 / 274

5
INTRODUCTION
THERMO ASSISTANCE
Thermo Assistance is a multilingual
communication tool designed to put you in direct
contact with an authorised Service Dealer should
you require one.
To use this system, you need the following
information before you call:
• Contact Phone Number
• Type of TK Unit
• Thermostat Setting
• Present Load Temperature
• Probable Cause of Fault
• If the Unit is Under Warranty
• How You Will Pay for the Repair
Refer to the Thermo King Service Directory.
Give the Thermo Assistance Operator your name
and a contact phone number and ask the operator
to call you back. Thermo Assistance will then call
you back, at which point you can give details of
the service required and the repair will be
organised.
Please note that Thermo Assistance cannot
guarantee payments and that the service is
designed for the exclusive use of refrigerated
transporters using products manufactured by
Thermo King Corporation.
INTRODUCTION
Thermo King Spain has developed a new digital
Control Box with a programmable microprocessor
that monitors the operation of the unit and
displays this information rapidly and clearly on
the screen.
These new In-cab Control Boxes have been
designed for use in Thermo King eC-Series units.
There is nothing complicated about learning to
use the In-cab Control Boxes manufactured by
Thermo King Spain, but you will find that a few
minutes spent studying the contents of this manual
will be time well spent.
The In-cab Control Boxes can operate with both
12 and 24V units.
Temperatures can be displayed in either degrees
Celsius or degrees Fahrenheit.
This driver’s manual is published for information
purposes only and the information being furnished
herein should not be considered as all-inclusive
or meant to cover all contingencies. If
further information is required, consult your
Thermo King Service Directory for the location
and phone number of your local dealer.
All service requirements, major and minor, should
be handled by a Thermo King dealer for four very
important reasons:
1. They are equipped with the factory
recommended tools to perform all service
functions.
2. They have factory trained and certified
technicians.
DISCLAIMER
The manufacturer, Thermo King Corporation,
assumes no responsibility for any act or action
taken on the part of the owner or operator in the
repair or operation of the products covered by
this manual that are contrary to the
manufacturer’s printed instructions. No
warranties express or implied, including
warranties arising from cause of dealing or usage
or trade, are made regarding the information,
recommendations, and description contained
herein. The manufacturer is not responsible and
will not be held liable in contract or in tort
(including negligence) for any special, indirect,
or consequential damages, including injury or
damage caused to vehicles, contents, or persons,
by reason of the installation of any Thermo King
product, its mechanical failure, or the failure of
the owner/operator to heed caution and safety
decals strategically located on the product.