Thermo King 098916, Руководство по обслуживанию

Страница: 71 / 196

Operating Instructions
70
Operating Instructions
Commands Menu
The Commands menu displays a list of tasks that
can be activated. The following commands are
available:
PTI (Full PreTrip) Test:
Controller automatically
completes a test of individual components, checks
unit refrigeration capacity, heating capacity and
temperature control. The test takes approximately
2-2 1/2 hours to complete. See “PTI (Full Pretrip)
Test” on page 75.
Power Management:
Sets power limit and power
limit activation (“On”) time.
Function Test:
Controller automatically tests the
operation of individual unit components. This is
not a performance test of the complete system.
See “Function Test” in this chapter for test details.
Manual Function Test:
Controller tests individual
components selected by the technician for
diagnosis. LCD display will show expected and
actual current of the component being tested.
Brief PTI (Brief Pretrip Test):
Controller
automatically completes a test of individual
components, checks unit refrigeration capacity,
heating capacity and temperature control. The
Test takes approximately 20-25 minutes to
complete. See “Brief PTI (Pretrip) Test” on page
71. Also refer to Full PTI Test above.
A complete listing of the controller operating
menu is located on an 11” x 17” fold out on the
last page of this manual.
View the Commands Menu
With the
U
NIT
O
N
/O
FF
switch
O
N
and LCD
display showing standard display (setpoint):
1. Press the
F2
or
F3
key to enter the Main
menu.
2. Press the
F2
or
F3
key to scroll through Main
menu until [COMMANDS] appears in LCD
display.
3. Press the F4 key to access Commands menu.
The first command in submenu appears in
LCD display.
Figure 39: Commands Menu
4. Press the F2 or F3 key to scroll to desired
command:
• [PTI] [(Pretrip) TEST]
• [POWER MANAGEMENT]
• [FUNCTION TEST]
• [MANUAL FUNCTION TEST]
• [BRIEF PTI TEST]
Press the
F4
key to activate command selected.
CAUTION: The PTI test should only be
performed on an empty container!
Commands
Menu
- PTI Test
- Power Management
- Function Test
- Manual Function Test
- Brief PTI Test
ALARMS
DATA
RMM STATE
CONFIGURATION
MISC FUNCTIONS
COMMANDS
MAIN MENU
DATALOGGER
NOTE: All screens are NOT
present on all units. The
screens that display on the
controller are determined by
the Controller Software
settings and the options
installed on the unit.