Thermo King 098916, Руководство по обслуживанию

Страница: 65 / 196

Operating Instructions
64
Inspect Event Log
With the
U
NIT
O
N
/O
FF
switch
O
N
and the LCD
display showing the standard display (setpoint):
1. Press the
F2
or
F3
key to enter Main menu.
2. Press the
F2
or
F3
key to scroll through Main
menu until [DATALOGGER] appears in LCD
display.
3. Press the
F4
key to access the Datalogger
menu. [INSPECT TEMP LOG] appears in the
LCD display.
4. Press the F2 or F3 key to scroll through
submenu until [INSPECT EVENT LOG]
appears in LCD display.
5. Press the F4 key to enter Event Log. LCD
display shows the Log Time and the most
recent event.
• To scroll through previous event log
screens, press the
F3 key. All event logs
recorded in the datalogger memory may be
viewed on the LCD display.
Event Examples
• Controller alarm status (alarms set/cleared)
• Main power On/Off status (humidity On/Off,
temperature setpoint, and main power Hz)
• 12 Vdc battery discharge test (battery voltage,
total unit and compressor hours if main power
on) — this event logged at once a day
• Change temperature setpoint (new/old
setpoint)
• Change RH setpoint (new/old RH setpoint)
• Change RH status (On/Off)
• Event log retrieval
• Temperature log retrieval
• Trip start
• New container ID
• PTI start (Unit configuration)
• PTI part 1 end (Temperature differences for
tests 1, 2, 3 and heat test
• PTI end
• Defrost start (logged with demand or manual
defrost only)
• Defrost end (start time)
6. Press the
ESC
key to exit the Event Log.