Themis RES-11XR3, Руководство по установке

Страница: 94 / 140

0
3-26
Themis Computer
RES-11XR3 Installation Manual
and will allow the viewing of each event by scrolling down on an Entry Number and
pressing Enter.
3.3.13 Set LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address.
Channel Number
Enter the channel number for the SET LAN Config command. This is initially set to
[1] . Press “+” or “-” on your keyboard to change the Channel Number.
Channel Number Status
This feature returns the channel status for the Channel Number selected above:
“Channel Number is OK” or “Wrong Channel Number”.
IP Address Source
This feature selects whether the IP address, Subnet Mask and Gateway Address are
automatically assigned by the network's DHCP server (Dynamic Host and Configu-
ration Protocol) or manually entered by the user (Static). If Static is selected, the IP
Address, Subnet Mask and Gateway Address must be manually entered below. If
DHCP is selected, the next three items will be configured automatically and will be
grayed out. The options are Static and
DHCP .
IP Address
Enter the IP address for this machine. This should be in decimal and in dotted quad
form (i.e., 192.168.10.253). The value of each three-digit number separated by dots
should not exceed 255.
Subnet Mask
Subnet masks tell the network which subnet this machine belongs to. The value of
each three-digit number separated by dots should not exceed 255 (i.e.,
Caution: Any cleared information is unrecoverable. Make absolutely sure that you
no longer need any data stored in the log before clearing the BMC Event Log.