Themis RES-11XR3, Руководство по установке

Страница: 34 / 140

1-8
Themis Computer
RES-11XR3 Installation Manual
or for it to automatically return to a power on state. See the Power Lost Control set-
ting in the BIOS chapter of this manual to change this setting. The default setting is
Last State .
1.3.2 Onboard Voltage Monitoring
The onboard voltage monitor will scan the following voltages continuously: CPU
Core, Chipset Voltage, Memory Voltage, +1.8V, +3.3V, +3.3V standby, +5V, +5V
Standby, Vbat and ±12V. Once a voltage becomes unstable, it will give a warning or
send an error message to the screen. Users can adjust the voltage thresholds to define
the sensitivity of the voltage monitor by using SD III.
1.3.3 Fan Status Monitor with Software
The RES-11XR3 has five 38-mm cooling fans and one within each power supply.
PC Health Monitoring can check the RPM status of the cooling fans via SuperO
Doctor III.
1.3.4 CPU Overheat LED and Control
This feature is available when the user enables the CPU overheat warning feature in
the BIOS. This allows the user to define an overheat temperature. When this temper-
ature reaches this pre-defined overheat threshold, the CPU thermal trip feature will
be activated and it will send a signal to the buzzer and, at the same time, the CPU
speed will be decreased
.
1.4 Power Configuration Settings
This section describes the features of your motherboard that deal with power and
power settings.
Caution: To avoid possible system overheating, please be sure to provide adequate
airflow to your system.