-2
Themis Computer
RES-11XR3 Installation Manual
ing RES-11XR3 storage drives (any except the boot drive), then installing a cable
with a standard male DB9 connector at one end and an On/Off switch (an LED is
optional
) at the other end.
When operational, if the RES-11XR3 is turned
OFF
, pressing the remote switch ON
will turn the system on.
If the RES-11XR3 is turned
ON
, pressing the switch OFF for less than 4 seconds
will gracefully shut down the system through the BIOS; pressing the switch OFF for
4 seconds or more results in a “hard” power off (equivalent to pulling the plug” on
the system).
D.2
Remote Only Configuration
When the Remote On/Off Switch module is configured as an ON-only device, if the
RES-11XR3 is turned
OFF
, pressing the remote switch ON will turn the system on.
Turning the RES system off, however, requires pressing the ON/OFF button that is
located directly on the front of the RES-11XR3 chassis.
D.3
Ordering the Remote On/Off Switch
Because internal modifications must be made to the RES-11XR3 in order to support
the Remote On/Off Switch module, the module must be ordered and installed at the
time your system is ordered.
Содержание RES-11XR3
