Themis RES-11XR3, Руководство по установке

Страница: 46 / 140

2-2
Themis Computer
RES-11XR3 Installation Manual
1. Loosen the two captive Phillips screws holding the protective top access cover
to the rear of the RES-11XR3 chassis (see
A , Figure 2-1 ).
2. Both the front and sides of the cover have flat hooks or tabs underneath that
fit under slots on the chassis top edges (see
B , Figure 2-1 ). Remove the cover
by sliding it toward the rear until it is free of these chassis slots.
3. Store the cover in a safe place until it is replaced.
4. Proceed to the appropriate section to install or replace a memory module
(page 2-3), PCI card (page 2-7), or lithium battery (page 2-13).
Figure 2-1. Remove the RES-11XR3 Protective Access Cover
Loosen the 2 captive access-cover screws...
A
B
Rear View
... and slide the top cover toward the rear until the top hooks and tabs clear all chassis slots
Chassis slot
Chassis slot
Left-side top edge