Themis RES-11XR3, Руководство по установке

Страница: 53 / 140

Installation and Operation
Installation Procedures
2-9
Themis Computer
2.1.3.1 Installing Cards
Right PCI Riser Card: Perform the following steps to install a right-hand PCI
card:
1. Locate the slot on the riser card (see Figure 2-5 on page 2-7) within which a
card will be installed and remove the Phillips screw holding the blank I/O
faceplate corresponding to the slot (see
Figure 2-8 ).
Figure 2-6.
PCI Riser Cards are attached to a Retainer Bracket...
Figure 2-7.
... then inserted into the PCI slots of the Motherboard
Upper PCI Card Slot
Retainer Bracket
Right Riser Card
PCI-Express 2.0 x16
Note: P/N of Riser Card shown = RSC-RR1U-UE16
Retainer Bracket