Themis RES-11XR3, Руководство по установке

Страница: 87 / 140

BIOS Setup Utility
IDE/SATA/Floppy Configuration
3-19
Themis Computer
3.3.7.1 Serial Port1 Address/Serial Port2 Address
This option specifies the base I/O port address and the Interrupt Request address of
Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from access-
ing any system resources. When this option is set to Disabled, the serial port physi-
cally becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its
I/O port address and IRQ 4 for the interrupt address. The options for Serial Port1 are
Disabled,
3F8/IRQ4, 2E8/IRQ3. The options for Serial Port2 are Disabled,
2F8/IRQ3 , and 2E8/IRQ3.
3.3.7.2 Serial Port 2 Mode
Use this feature to configure Serial Port 2 mode. The options are Normal, IrDA and
ASK IR. IrDA (Infrared Data) is an industry standard for remote control devices.
ASK IR (Amplitude Shifted Keying Infrared) is a protocol compatible with Sharp®
branded PDAs and other infrared devices.
3.3.7.3 Onboard Floppy Controller
Select Enabled to enable the onboard Floppy Controller. The options are Enabled
and Disabled.
3.3.8 Remote Access Configuration
3.3.8.1 Remote Access
This allows the user to enable the Remote Access feature. The options are Enabled
and Disabled.
If Remote Access is set to Enabled, the following items will be displayed:
Serial Port Number
This feature allows the user decide which serial port to be used for Console Redirec-
tion. The options are COM1, COM2 and
COM3 . An additional option, Onboard
IPMI is featured on the X8STi-F/X8STi-3F motherboard only and becomes the
default.
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection. The
options are
115200 8, n 1 ; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n,
1.