Themis RES-11XR3, Руководство по установке

Страница: 54 / 140

2-10
Themis Computer
RES-11XR3 Installation Manual
2. Remove the blank I/O faceplate corresponding to the slot.
3. Carefully install the PCI card into the slot, securing its I/O faceplate to the rear
I/O panel—if permitted—with the Phillips screw removed in Step 1. Secure
the side edge of each card according to the following instructions:
Upper-Right PCI Expansion Slot —After installing the upper-right PCI
expansion card, install a PCI Retainer Clip—two if necessary—that was
shipped with your order onto the edge of the PCI card (see
A , Figure 2-9 on
page 2-11), and slide it along the edge until it is positioned over one of the
several slots along the top edge of the RES-11XR3 chassis (see
B , Figure
Note: Call Themis Technical Support if there is a question on how to secure the
PCI I/O faceplate to the rear I/O panel.
Figure 2-8.
The RES-11XR3 has One PCI Expansion Slots
Upper-Right PCI Expansion Slot
(PCI-Express 2.0 x16)