Themis RES-11XR3, Руководство по установке

Страница: 58 / 140

RES-11XR3 Installation Manual
2-14
Themis Computer
3. Remove the old battery and replace with a new battery (see next section).
2.1.4.2 Installing a Lithium Battery
Perform the following steps to insert a new lithium battery:
1. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
B , Figure 2-12 ).
2. Carefully press down on the battery until it clicks firmly into place.
2.1.5 SAS/SATA Storage Drive
Perform the following steps to remove and install a SAS/SATA storage drive.
The front bezel (door) of the RES-11XR3 must be unlocked and opened to access
the SAS/SATA storage drives.
2.1.5.1 Opening the RES-11XR3 Front Doors
To access the removable storage drives, you must first open the front doors (see Fig-
Figure 2-12.
The RES-11XR3 Lithium Battery and Socket
To release, squeeze the battery latch together...
Battery
A B
Latch
. and remove the battery from socket
Note: For SATA drives, the left-hand removable disk drive (SATA ID0) is desig-
nated as the boot drive.