Themis RES-11XR3, Руководство по установке

Страница: 82 / 140

0
3-14
Themis Computer
RES-11XR3 Installation Manual
3.3.2 SATA#1 Configuration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while
selecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,
Compatible and
Enhanced .
3.3.2.1 Configure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE, RAID and AHCI.
3.3.2.2 ICH RAID Code Base (Available if RAID is selected above)
Select Intel to enable the Intel SATA Host RAID Utility. Select Adaptec to use the
Adaptec Host RAID Utility. The options are
Intel and Adaptec.
3.3.3 SATA#2 Configuration (Available when the option-
IDE is selected under “Configure SATA #1 as”
above.)
Selecting Enhanced will set SATA#2 to native SATA mode. The options are Dis-
abled, and
Enhanced .
3.3.4 IDE Detect Timeout (sec)
Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35 .
3.3.5 Primary IDE Master/Slave, Secondary IDE Mas-
ter/Slave, Third IDE Master, and Fourth IDE Master
These settings allow the user to set the parameters of Primary IDE Master/Slave,
Secondary IDE Master/Slave, Third and Fourth IDE Master slots. Hit <Enter> to
activate the following submenu screen for detailed options of these items. Set the
correct configurations accordingly. The items included in the submenu are:
3.3.5.1 Type
Select the type of device connected to the system. The options are Not Installed,