Themis RES-11XR3, Руководство по установке

Страница: 66 / 140

2-22
Themis Computer
RES-11XR3 Installation Manual
2.2.2 Rack-Mount Slides (Optional)
Rack-Mount Slides can be mounted on each side of the RES-11XR3, for the purpose
of sliding the unit in and out of a rack. Mounting slides are optional and should be
ordered at the time your system is purchased.
To learn how to install rack-mount slides, refer to Appendix B, “Rack-Mount Slide
Installation”.
2.3 Operation
2.3.1 Plugging in the AC Power Cords
Before powering on the RES-11XR3, plug in the AC power cords as follows:
1. On the rear of the RES-11XR3, plug an AC power cord (shipped with unit)
into the AC power socket on each power supply (see
Figure 2-20 ).
Caution: Any screws used to mount a slide to a RES-11XR3 chassis must not ex-
ceed a length of 3/8” to prevent excessive penetration of the chassis.
Figure 2-20. AC Power Socket and LED on the RES-11XR3 Rear
AC Power Socket
Power LED
Locking Lever