Themis RES-11XR3, Руководство по установке

Страница: 60 / 140

2-16
Themis Computer
RES-11XR3 Installation Manual
storage drive:
1. Make sure the necessary precautions have been observed as per the previous
Note (see “Operation” on page 2-22).
2. Locate the drive to be removed.
3. Insert the barrel lock key into the hard drive you want to remove, and turn it
45 degrees clockwise (presuming the disk drive is locked).
4. Firmly push in the latch lock until the latch handle releases from the drive.
5. Grab the latch handle and pull the drive completely away from its slot.
Note: Since RES-11XR3 disk drives are “hot-swappable”, it is not necessary to
turn off system power in order to remove and replace a drive (except the operating
system drive). However, after a warning has been broadcast to all users, the drive
being replaced should be dismounted before being removed.
Consult your operating system manual for specific details.
Caution: When pulling the storage drive from the chassis, hold it at the bot-
tom to prevent it from falling and damaging the drive.