TEXIO DL-1060, Инструкция по эксплуатации

Страница: 124 / 146

118
CALCulate:AVERage:COUNt?
Read the number of readings taken since Min/Max has been enabled. The multimeter clears
the value when Min/Max is turned on, when the power has been off or a remote interface
reset.
CALCulate:NULL:OFFSet {< value >|MINimum|MAXimum}
Store a null value in the multimeter’s Null Register. You must turn on the math operation
before writing to the math register . You can set the null value to any number between 0 and

120% of the highest range.
CALCulate:NULL:OFFSet?
Query the null value.
CALCulate:LIMit:LOWer {<value>|MINimum|MAXimum}
Set the lower limit for limit testing. You can set the value to any number from 0 to

120% of
the highest range, for the present function.
CALCulate:LIMit:LOWer?
Query the lower limit for the limit testing.
CALCulate:LIMit:UPPer {<value>|MINimum|MAXimum}
Set the upper limit for limit testing. You can set the value to any number from 0 to

120% of
the highest range, for the present function.
CALCulate:LIMit:UPPer?
Query the upper limit for the limit testing.
CALCulate:MXB:MMFactor {<value>|MINimum|MAXimum}
Set the value of M.
CALCulate:MXB:MMFactor? [MINimum|MAXimum]
Query the value of M.
CALCulate:MXB:MBFactor {<value>|MINimum|MAXimum}
Set the value of B.
CALCulate:MXB:MBFactor? [MINimum|MAXimum]
Query the value of B.
CALCulate:DB:REFerence {<value>|MINimum|MAXimum}
Store a relative value in the dB Relative Register. You must turn on the math operation before
writing to the math register . You can set the relative value to any number between 0 dBm and

200 dBm.