TEXIO DL-1060, Инструкция по эксплуатации

Страница: 130 / 146

124
About the Status Byte
The conditions from other status registers will be reported by the status byte summary register.
To clear an event register will clear the according bits in the status byte summary register. And
to read all messages in the output buffer, including all pending queries, will clear the message
available bit. The following list shows the definition of each bit.
Bit
Decimal
Value
Definition
0.
Not Used 1 Set to 0.
1.
Not Used 2 Set to 0.
2.
Not Used 4 Set to 0.
3.
Questionable Data 8
One or more bits are set in the questionable data register (Bits
have to be
“ enabled ” in enable register).
4.
Message Available 16 Data in the DMM ’ s output buffer is available.
5.
Standard Event 32
One or more bits are set in the Standard Event Register (Bits have
to be
“ enabled ” in enable register).
6.
Request Service 64 The DMM is requiring service (Serial Poll).
7.
Not Used 128 Set to 0.
On the other hand, there are some conditions that users have to note.