(4)The cutting edge of the knife must face X+ direction and tighten
the fixing ring in the rightmost figure
(5)Fix the black slot to the iron rod in the figure and insert the
tool cable into the left socket.
(6)Knife depth setting
①
Press
to enter the knife depth setting page.
②
Press the following buton to change
SP:
0
to
SP:
4
.
The
“
down 52.32
”
shown in the picture is the knife depth set before
,
that is, the current knife depth.If the distance between the current
tool tip and the table top is greater than this number, you can press
to drop the tool bar to the 52.32 knife depth position at one
time.
(Note: When changing the knife tool or knife, it is necessary
to judge whether to use
according to the actual situation. If
the cutter head falls too deep, it may pierce the felt and platform,
causing the knife breakage and platform damage.)
③
and
should be used together
,
The former is the
Содержание XYZ 2518
Страница 1: ...TEXI XYZ 2518 MANUAL...