Texi XYZ 2518, Руководство пользователя

Страница: 27 / 51

(15) Specify the processing speed of a circle or arc within
a certain size range. For example, when the “ lim dia ” is 10, for a
circle with a diameter greater than 10 mm, the processing speed of the
machine is the set curve speed; for a circle with a diameter less than
10 mm, the machine will automatically reduce the processing speed
according to a certain proportion.
6.5 Config Page
(1)Press “ config ” to enter the config page. (Note:Config is short for
configuration)
(1)Some functions and settings can be set in the config page, and the
corresponding authorization code can be input according to the main
board number displayed on this page to extend the service life.
(2) ,Before the machine processing, the vacuum pump won
’
t
work automatically.It can be changed to “ auto vacuum ” by pressing it.
， Vacuum pump will work automatically before the machine
processing.
(3) ,The oscillating knife cutting tool will not vibrate
during cutting, which is equivalent to unplugging the signal line of
the oscillating cutting knife tool. It can be changed to
“ auto vibrate ”
by pressing it.