Texi XYZ 2518, Руководство пользователя

Страница: 7 / 51

② Connect No.2 (The signal cable of the returning-air box) to the
“ Returning Air Box ” port on the machine.
③ Connect No.3 to the No.6 (The inlet of the vacuum pump) by the air
pipe.
④ Connect No.4 (Solenoid valve) to the oil water separator (Pneumatic
valve) on the machine by the air tube.
⑤ Connect No.5 to the No.7 (The outlet of the vacuum pump) by the air
pipe.
⑥ No.8 is the Hush pipe, No.9 is the pressure relief valve, it must
be installed onto the reducer which is connected to the inlet of the
vacuum pump. No.10 is the mini distribution box.
After connection finished ， as shown below ：
2.2 220V
(Note:Take the auto-feeding machine as an example)
(1)Distribution Box
① Input
A. Connect the U-shaped terminals of the Signal&Protection cable to the