Texi XYZ 2518, Руководство пользователя

Страница: 29 / 51

machine function, and the “ expire ” is the expiration date for the
use of the machine..
(8) ,These data are used to modify the actual processing
length of every tool during processing.
① down extend:It is the processing parameter of the starting point of
a single continuous processing graph,that is,the processing parameter
of the falling position of the tool.
② up extend:It is the processing parameter of the end point of a single
continuous processing graph,that is,the processing parameter of the
raise position of the tool.
③ The value is bigger than 0:For example,cut a 50mm length line,the
down extend is 2, the up extend is 3, the actual length of this line
is 55mm after cutting.
④ The value is smaller than 0:For example, cut a 50mm length line,the
down extend is -2, the up extend is -3, the actual length of this line
is 45mm after cutting.
6.6 Test Page
(1)Press “ test ” button to enter the test page.