(Note:In order to prevent wrong operation, some buttons and
parameters can
’
t be used in condition of lock,for example
)
(2)Unlock the icons:
,The default code is 1234
，
type 1234
into the left frame, then press
“
unlock
”
to unlock the icons.
(Note:If
there is no special case, please do not change the password, so as to
prevent our technicians from checking the operation of the machine
normally in case of failure)
(3)Lock the icons:In condition that the icons have been unlocked, type
any wrong code into the frame and press
“
unlock
”
,the icons will be
locked again.
(4)
,Input the number of times to be processed in
“
times
”
, and then press
in
“
test
”
page, the machine
will start to process according to the set times. The
“
cut
times
”
shows the number of times the processing has been
completed.
(Note:The number of the
“
times
”
can not be smaller than the
number of
“
cut times
”
)
(5)
,After the processing is completed, the cutter head will
go to the (X, Y) position.Press
,it will change to
，
it means the cutter head will stop at the finish position after
processing is completed.
(6)
To save the current graph.The next time to turn on the
machine, press
to read and process the graph.
(7)
These four are used for
partition adsorption.
(Note:Models without partition adsorption function do not have this
part of function buttons)
①
It means the partition adsorption area can be selected
manually. Press
button, it will show as below:
Содержание XYZ 2518
Страница 1: ...TEXI XYZ 2518 MANUAL...
