Texi XYZ 2518, Руководство пользователя

Страница: 26 / 51

(5) , “ origin ” data are the moving speed of every axis
after pressing the “ origin ” button which is in the “ work ” page. “ jog ”
data are the moving speed of every axis during manual operation.
(6) It means the interval between the oscillating knife
tool vibrating and start cutting after the “ repeat ” button is pressed.
(7) It means the rotational speed of the punching knife.
(8) It means the interval between the vacuum pump
starts to work and after the “ repeat ” or “ vacuum ” button is pressed.
(9) It means the distance of drag material, and the
distance depends on the length of the processed graph.For example, if
you need to cut the pattern with a length of 2400mm, the machine will
drag 2400mm distance. If you cut a square with side length of 100mm,
the machine will drag100mm distance.
(10) It is the difference between the theoretical drag
distance and the actual drag distance. For example, when cutting a
square with a side length of 1000mm, the theoretical drag distance is
1000mm, while the actual drag distance is 990mm, the difference between
the two is 10 mm, and the value of drag compensation is modified to
10, then the actual drag distance is 1000mm.
(11) It means the angle between the knife and the present
straight line when it is about to turn. If the actual angle is larger
than the set angle, the knife will raise and rotate the degree of the
corner and then fall and cut. If the actual angle is less than the set
angle, the knife will not be lifted and will be turned directly for
cutting.
(12) It means the accuracy of the corner during the cutting
process, which is generally set according to the machine ’ s curve speed.
For materials with higher requirements, the corner accuracy is
generally set at about 1.5
.
(13) It means drag delay, the interval between after
cutting of a set of pattern and the next drag action of the machine.
(14) It means the speed of drag material.