Page
17
of
76
5.7
Remote
control
The remote control is designed to decrease the number of times the user needs to bend
down. On top of the remote control, an antenna gives visual information about the state of
the device.
The remote control exists in two versions which can be ordered separately: as part of the
Multifunctional Pole or as a Desktop Remote Control.
•
Four buttons allow the user to operate the touch screen. The pictograms on the buttons
can also be found on the touch screen. Their function is the same. Buttons whose
pictograms aren’t visible on the touch screen, have no function.
Touch screen
Remote control
In this case, the right button has no function since its pictogram is not shown on the
touch screen.
•
The antenna is colored as follows:
Red flashing slow (0.7Hz) Alarm indicating the end of donation (medium priority
alarm).
Red flashing fast (1.5Hz) Alarm/error during a donation (medium priority alarm).
White
Donation process started (including processing events).
White flashing
Alarm / error not related to a donation (low priority
alarm).
Yellow
Donation in progress, collected volume 0-25%.
Green
Donation in progress, collected volume 25-50%.
Blue
Donation in progress, collected volume 50-75%.
Purple
Donation in progress, collected volume 75-100%.
The color during donation changes gradually as follows. If the antenna flashes during
the donation stage in one of these colors, a low flow rate pre-alarm is triggered.
0%
100%
Содержание T-RAC II
