Terumo BCT T-RAC II, Инструкция по эксплуатации

Страница: 127 / 146

Page 57 of 76
The lengths of the flags are configured in the barcode event settings on TOMEs. Only
parts of the same length can be compared to each other.
[NOTE] In the barcode event settings on TOMEs, it is possible to program additional
barcode checks.
7.3 Communication settings
The communication settings define how T-RAC II should connect to TOMEs or to TOMEs
Mobile Collection Tool. These settings can only be changed on each T-RAC II device
individually. Following settings are available:
Static/dyn IP
stat / dyn Default: dyn
stat: T-RAC II will use a static IP-address. This IP-address, the subnet mask and
the gateway IP-address can be defined in the settings
‘Static IP’, ‘Subnet
mask’ and ‘Gateway IP’.
dyn:
T-RAC II will receive an IP-address automatically from the router via DHCP.
The settings ‘Static IP’, ‘Subnet mask’ and ‘Gateway IP’ are not available.
Static IP
000.000.000.000 – 255.255.255.255 Default: 192.168.001.002
This setting is only available when the option ‘Static/dyn IP’ is set to ‘stat’. It defines
the IP-address of the T-RAC II.
Subnet mask
000.000.000.000 – 255.255.255.255 Default: 255.255.255.000
This settin g is only available when the option ‘Static/dyn IP’ is set to ‘stat’. It defines
the subnet mask of the T-RAC II.
Gateway IP
000.000.000.000 – 255.255.255.255 Default: 192.168.001.001
This setting is only available when the option ‘Static/dyn IP’ is set to ‘stat’. It defines
the IP-address of the gateway the T-RAC II will connect to.
TOMEs IP
000.000.000.000 – 255.255.255.255 Default: 192.168.1.100
This setting defines the IP-address of the TOMEs device or the PC running TOMEs Mobile
Collection Tool that T-RAC II should communicate with.